autocad tutorial for created cross section surface map

Membuat cross section map dengan autocad (created cross section surface map)

For create map using autocad, can be done in two way :

A.    Using autocad integrated with quicksurf (try trial version or you can buy it if you like this software)

B.    Using autocad land desktop. We will guide you using this software  to create cross section in our other post

In this opportunity we will guide you to created cross section from topography map. When Using autocad integrated with quicksurf we have to done it in several step, it just so easy, the different of using quicksurf then other software is you can control your cross section surface as you ‘re desire, you can control dimension, vertical range, etc. the very important thing is you can use all of autocad feature specially if you more familiar with that then using feature in autocad Land desktop, using dimension for calculate range and distance more easier. Cross-section witch representation surface in 2D profiles, it can use when we want to know bedding set from many lithology by overlay it in one section, or when we use cross section method for calculating volume. Cross section familiar using for mine exploration (coal exploration) to determinate the inclined of coal or to estimate deposite volume of coal and overburden

1)          Open autocad

2)          Created map (see our other post 5 step created map with autocad) / open digital map

3)          If map didn’t show push Z enter E enter to show it

4)          Point to quicksurf – ekstract from drawing – extract to surface ,  it will take several time wait until quicksurf finish to read the map /entities

This step always done when open map at the first time, otherwise this software wouldn’t read the elevation from your map

5)          Point to quicksurf –triangulated grid  this will open surface - right click – this will open none/show /draw / redraw write s, wait until quicksurf finish creating triangulated from your surface, this will short waiting time when use command cross section

6)          Scroll mouse this will make triangulated hide

You can skip step 5 and 6 but if you done it it will take longer waiting time then using that step.

7)          Before you created cross section we have to configure the elevation range from your surface, Click on contour look for the lowest elevation and highest elevation from surface map, see elevation on left corner side of your windows

8)          After you get range elevation, go to next step for configure cross section

9)          Point to quicksurf – configuration- configure section, this will show you 2D section properties – click on graph – at vertical range unclick auto fill the min with lowest elevation and max with highest elevation

10)    Drawing control line on the surface (on the area that need to be convert to cross section)

11)    Point to quicksurf – design tools – cross section - surface – right click – select object select control line - right click - none/show /draw / redraw write D – lower left corner- left click – drag the mouse – upper right corner – left click
get the software at :
https://redirect.viglink.com?key=6d80225e1e0279c719b9d99ee5d5d846&u=https%3A%2F%2Fwww.rockware.com%2Fproduct%2FproductDemo.php%3Fid%3D205